Standard Hose Insert × Standpipe Metric

Group 1400 Standpipe Metric dimensional drawing

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Tube OD	A	B	C	H	Weight (kg)
14000406316	1/4"	8	6 mm	57	30	23	Ø4	0.010
14000408316	1/4"	8	8 mm	57	30	23	Ø4.5	0.012
14000410316	1/4"	8	10 mm	59	32	25	Ø4.5	0.016
14000610316	3/8"	10	10 mm	63	33	25	Ø7	0.021
14000612316	3/8"	10	12 mm	63	33	25	Ø7	0.025
14000614316	3/8"	10	14 mm	68	38	30	Ø7	0.038
14000615316	3/8"	10	15 mm	65	35	27	Ø7	0.036
14000812316	1/2"	15	12 mm	64	33	25	Ø8	0.040
14000815316	1/2"	15	15 mm	66	35	27	Ø10	0.040
14000816316	1/2"	15	16 mm	69	38	30	Ø10	0.046
14000818316	1/2"	15	18 mm	67	36	27	Ø10	0.052
14000820316	1/2"	15	20 mm	75	44	35	Ø10	0.076
14001018316	5/8"	16	18 mm	70	36	27	Ø12	0.063
14001020316	5/8"	16	20 mm	78	44	35	Ø12	0.092
14001220316	3/4"	20	20 mm	83	45	35	Ø15	0.086
14001222316	3/4"	20	22 mm	77	39	29	Ø15	0.095
14001225316	3/4"	20	25 mm	88	50	40	Ø15	0.130
14001228316	3/4"	20	28 mm	78	40	30	Ø15	0.130
14001625316	1"	25	25 mm	99	61	40	Ø20	0.160
14001628316	1"	25	28 mm	89	41	30	Ø20	0.175
14001630316	1"	25	30 mm	102	54	43	Ø20	0.236
14002035316	1 1/4"	32	35 mm	102	47	35	Ø24.5	0.450
14002038316	1 1/4"	32	38 mm	112	57	45	Ø24.5	0.485
14002442316	1 1/2"	40	42 mm	110	53	40	Ø32	0.510

Article number structure

1400 | 04 | 06 | 316

Series | Hose size code | Tube OD code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Tube connection	General product information
Type Standard Hose Insert Hose size 1/4"–1 1/2" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 1400 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type Metric standpipe Configuration Straight Tube outside diameter See Tube OD column Units Millimetres	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

Metric standpipe end

Metric standpipe with outside diameter in millimetres as specified in the Tube OD column.

IM-1400 · HTML DRAFT 01
Layout example based on the group 1400 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.