PRODUCT GROUP41011 Wire
MATERIALSS316LStainless steel

Crimp Sleeve 1 Wire Non-Skive

EN 853 1SNSAE 100 R1AT
Group 4101 crimp sleeve dimensional drawing with A, B and C references

Dimensions

Dimensions in mm

Item numberHose sizeSleeve typeABCWeight (kg)
410104043161/4"1 Wire Non-Skive25Ø21.5Ø150.022
410106063163/8"1 Wire Non-Skive28Ø25Ø18.20.030
410108083161/2"1 Wire Non-Skive31Ø29Ø21.70.045
410110103165/8"1 Wire Non-Skive31Ø32Ø250.048
410112123163/4"1 Wire Non-Skive32Ø36Ø28.50.068
410116163161"1 Wire Non-Skive41Ø45Ø36.50.111
410120203161 1/4"1 Wire Non-Skive41Ø55Ø450.154
410124243161 1/2"1 Wire Non-Skive45.5Ø63Ø520.198
410132323162"1 Wire Non-Skive45.5Ø77.5Ø65.30.334
Download Datasheet

Product specifications

Hose compatibilitySleeve & assemblyGeneral product information
Hose type
1-wire braided
Hose standard
EN 853 1SN / SAE 100 R1AT
Hose size
1/4"–2" (see variants)
Type
Crimp sleeve
Assembly
Non-skive — For standard hose inserts
Compatibility
Customer must verify hose, insert and sleeve compatibility
Material:
AISI 316L / EN 1.4404 / UNS S31603
HS code
73079900
Country of origin
Norway

Technical info

Crimp sleeve

Intended for non-skive assembly of single-wire braided hydraulic hoses to EN 853 1SN / SAE 100 R1AT, subject to verified hose, insert and sleeve compatibility. Assembly working pressure depends on the validated component combination, correct insertion depth and crimping to the specified diameter and tolerances. It must not exceed the lowest component pressure rating, with any applicable temperature and service derating taken into account.

IM-4101 · HTML DRAFT 01
Layout example based on the group 4101 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.