Standard Hose Insert × Standpipe Metric, Elbow 45°

Group 1445 Standpipe Metric 45° dimensional drawing

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Tube OD	A	B	C	E	H	Weight (kg)
14450406316	1/4"	8	6 mm	74	24	47	23	Ø4	0.020
14450408316	1/4"	8	8 mm	74	24	47	23	Ø4.5	0.021
14450410316	1/4"	8	10 mm	76	26	49	25	Ø4.5	0.028
14450610316	3/8"	10	10 mm	86	31	56	25	Ø7	0.036
14450612316	3/8"	10	12 mm	86	31	56	25	Ø7	0.043
14450614316	3/8"	10	14 mm	89	34	59	30	Ø7	0.055
14450615316	3/8"	10	15 mm	87	32	57	27	Ø7	0.054
14450812316	1/2"	15	12 mm	94	31	63	25	Ø8	0.068
14450815316	1/2"	15	15 mm	96	33	65	27	Ø10	0.071
14450816316	1/2"	15	16 mm	98	35	67	35	Ø10	0.077
14450818316	1/2"	15	18 mm	96	33	65	27	Ø10	0.074
14450820316	1/2"	15	20 mm	101	38	70	35	Ø10	0.145
14451018316	5/8"	16	18 mm	109	41	75	27	Ø12	0.138
14451020316	5/8"	16	20 mm	114	46	81	35	Ø12	0.158
14451220316	3/4"	20	20 mm	129	48	91	35	Ø15	0.169
14451222316	3/4"	20	22 mm	126	45	88	29	Ø15	0.170
14451225316	3/4"	20	25 mm	131	50	93	40	Ø15	0.249
14451625316	1"	25	25 mm	158	55	110	40	Ø19	0.350
14451628316	1"	25	28 mm	151	48	103	30	Ø19	0.350
14451630316	1"	25	30 mm	160	57	112	43	Ø19	0.432
14452035316	1 1/4"	32	35 mm	181	57	126	35	Ø24	0.680
14452038316	1 1/4"	32	38 mm	188	64	133	45	Ø24	0.720
14452442316	1 1/2"	40	42 mm	205	68	148	40	Ø30	1.030

Article number structure

1445 | 04 | 06 | 316

Series | Hose size code | Tube OD code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Tube connection	General product information
Type Standard Hose Insert Hose size 1/4"–1 1/2" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 1445 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type Metric standpipe Configuration 45° Bend Tube outside diameter See Tube OD column Units Millimetres	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

Metric standpipe end

Metric standpipe with outside diameter in millimetres as specified in the Tube OD column.

IM-1445 · HTML DRAFT 01
Layout example based on the group 1445 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.