Standard Hose Insert × NPT Male

ASME B1.20.1

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Threads	A	B	H	Hex	Weight (kg)
11000404316	1/4"	8	1/4" NPT	55	28	Ø4.5	17	0.030
11000406316	1/4"	8	3/8" NPT	59	29	Ø4.5	19	0.042
11000604316	3/8"	10	1/4" NPT	58	28	Ø7	17	0.038
11000606316	3/8"	10	3/8" NPT	62	32	Ø7	19	0.050
11000608316	3/8"	10	1/2" NPT	66	36	Ø7	22	0.074
11000806316	1/2"	15	3/8" NPT	64	33	Ø9.5	19	0.052
11000808316	1/2"	15	1/2" NPT	68	37	Ø10	22	0.077
11000812316	1/2"	15	3/4" NPT	72	42	Ø10	27	0.125
11001208316	3/4"	20	1/2" NPT	79	41	Ø10	27	0.120
11001212316	3/4"	20	3/4" NPT	80	42	Ø15	27	0.145
11001216316	3/4"	20	1" NPT	85	47	Ø15	36	0.236
11001616316	1"	25	1" NPT	97	49	Ø20	36	0.288
11002020316	1 1/4"	32	1 1/4" NPT	105	50	Ø24.5	46	0.479
11002424316	1 1/2"	40	1 1/2" NPT	110	52.5	Ø32	50	0.567
11003232316	2"	50	2" NPT	126	64	Ø45	65	0.878

Article number structure

1100 | 04 | 04 | 316

Series | Hose size code | NPT size code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Threaded connection	General product information
Type Standard Hose Insert Hose size 1/4"–2" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 1100 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type NPT Male Configuration Straight Thread standard ASME B1.20.1	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

NPT Male end

Tapered pipe thread to ASME B1.20.1.

IM-1100 · HTML DRAFT 01
Layout example based on the group 1100 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.