Standard Hose Insert × JIC 37° Male

ISO 8434-2

Group 0700 JIC 37° Male dimensional drawing

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Threads	Dash	A	B	H	Hex	Weight (kg)
07000407316	1/4"	8	7/16"-20 UN	-4	57	30	Ø4.5	14	0.024
07000408316	1/4"	8	1/2"-20 UN	-5	57	30	Ø4.5	14	0.028
07000409316	1/4"	8	9/16"-18 UN	-6	57	30	Ø4.5	17	0.033
07000609316	3/8"	10	9/16"-18 UN	-6	60	30	Ø7	17	0.038
07000612316	3/8"	10	3/4"-16 UN	-8	62	32	Ø7	22	0.058
07000812316	1/2"	15	3/4"-16 UN	-8	64	33	Ø10	22	0.074
07000814316	1/2"	15	7/8"-14 UN	-10	69	38	Ø10	24	0.084
07001014316	5/8"	16	7/8"-14 UN	-10	72	38	Ø12	24	0.110
07001217316	3/4"	20	1 1/16"-12 UN	-12	81	43	Ø15	30	0.156
07001221316	3/4"	20	1 5/16"-12 UN	-16	81	43	Ø15	36	0.212
07001617316	1"	25	1 1/16"-12 UN	-12	91	43	Ø15	32	0.192
07001621316	1"	25	1 5/16"-12 UN	-16	91	43	Ø20	36	0.251
07002026316	1 1/4"	32	1 5/8"-12 UN	-20	101	46	Ø24	46	0.445
07002430316	1 1/2"	40	1 7/8"-12 UN	-24	108	50	Ø30	50	0.545

Article number structure

0700 | 04 | 07 | 316

Series | Hose size code | JIC thread size code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Threaded connection	General product information
Type Standard Hose Insert Hose size 1/4"–1 1/2" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 0700 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type JIC Male Configuration Straight · 37° flare Connection standard ISO 8434-2 Thread standard ASME B1.1	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

JIC Male end

37° flare connection to ISO 8434-2 with UN/UNF thread to ASME B1.1.

IM-0700 · HTML DRAFT 01
Layout example based on the group 0700 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.