Standard Hose Insert × Metric 24° Female, Elbow 90°

ISO 8434-1

Group 2290 dimensional drawing — 90° Bend — Strong Series

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Tube size	Threads	A	B	C	H	Hex	Weight (kg)
22900408316	1/4"	8	8S	M16×1.5	54	31	31	Ø4.5	19	0.041
22900410316	1/4"	8	10S	M18×1.5	54	31	31	Ø4.5	22	0.052
22900612316	3/8"	10	12S	M20×1.5	63	37	33	Ø7	24	0.069
22900614316	3/8"	10	14S	M22×1.5	63	38	33	Ø7	27	0.118
22900816316	1/2"	15	16S	M24×1.5	75	47	44	Ø10	30	0.140
22901020316	5/8"	16	20S	M30×2.0	87	55	52	Ø12	36	0.240
22901220316	3/4"	20	20S	M30×2.0	100	65	62	Ø15	36	0.283
22901225316	3/4"	20	25S	M36×2.0	100	66	62	Ø15	41	0.380
22901625316	1"	25	25S	M36×2.0	125	76	77	Ø19	41	0.484
22901630316	1"	25	30S	M42×2.0	125	78	77	Ø19	50	0.610
22902038316	1 1/4"	32	38S	M52×2.0	155	100	100	Ø24	60	0.890

Article number structure

2290 | 04 | 08 | 316

Series | Hose size code | Metric tube size code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Threaded connection	General product information
Type Standard Hose Insert Hose size 1/4"–1 1/4" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 2290 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type Metric 24° Female Swivel Configuration 90° Bend · Strong Series Connection standard ISO 8434-1 Thread standard ISO 724	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

Metric 24° female end

24° female swivel end to ISO 8434-1 with ISO metric thread to ISO 724, tolerance class 6H to ISO 965-1.

IM-2290 · HTML DRAFT 01
Layout example based on the group 2290 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.