Standard Hose Insert × BSPP Male 60° Internal Cone

ISO 8434-6ISO 1179-2

Group 0200 BSPP Male 60° Internal Cone dimensional drawing

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Threads	A	B	C	H	Hex	Weight (kg)
02000404316	1/4"	8	G 1/4"	54	16	27	Ø4.5	19	0.035
02000406316	1/4"	8	G 3/8"	57	17	30	Ø4.5	22	0.056
02000408316	1/4"	8	G 1/2"	60	18.5	33.5	Ø4.5	27	0.080
02000604316	3/8"	10	G 1/4"	57	16	27	Ø6.5	19	0.039
02000606316	3/8"	10	G 3/8"	60	17	30	Ø7	22	0.051
02000608316	3/8"	10	G 1/2"	63	18.5	33.5	Ø7	27	0.083
02000806316	1/2"	15	G 3/8"	61.5	17	30	Ø9.5	22	0.056
02000808316	1/2"	15	G 1/2"	64.5	18.5	33.5	Ø10	27	0.092
02000810316	1/2"	15	G 5/8"	67	19	35	Ø10	30	0.113
02000812316	1/2"	15	G 3/4"	69	22	39	Ø10	32	0.136
02000816316	1/2"	15	G 1"	72	23	42	Ø10	41	0.232
02001008316	5/8"	16	G 1/2"	68	18.5	33.5	Ø12	27	0.112
02001010316	5/8"	16	G 5/8"	70	20	36	Ø12	30	0.126
02001012316	5/8"	16	G 3/4"	72	22	39	Ø12	32	0.145
02001208316	3/4"	20	G 1/2"	73	18.5	33.5	Ø15/12	27	0.116
02001210316	3/4"	20	G 5/8"	75	20	36	Ø15/12	30	0.148
02001212316	3/4"	20	G 3/4"	77	22	39	Ø15	32	0.161
02001216316	3/4"	20	G 1"	81	24	43	Ø15	41	0.269
02001612316	1"	25	G 3/4"	87	22	39	Ø15	32	0.260
02001616316	1"	25	G 1"	91	24	43	Ø20	41	0.293
02002020316	1 1/4"	32	G 1 1/4"	102	25	47	Ø24.5	50	0.497
02002424316	1 1/2"	40	G 1 1/2"	105	25.5	47.5	Ø32	55	0.594
02003232316	2"	50	G 2"	118	30	56	Ø45	70	0.880

Article number structure

0200 | 04 | 04 | 316

Series | Hose size code | BSPP size code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Threaded connection	General product information
Type Standard Hose Insert Hose size 1/4"–2" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 0200 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type BSPP Male Configuration Straight · 60° Internal Cone Connection standard ISO 8434-6 / ISO 1179-2 Thread standard ISO 228-1	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

BSPP Male end

Parallel G thread to ISO 228-1. The connection may be sealed either on the 60° internal cone to ISO 8434-6, or against the external shoulder using an elastomeric bonded seal to ISO 1179-2.

IM-0200 · HTML DRAFT 01
Layout example based on the group 0200 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.