Standard Hose Insert × BSPP Female Swivel Flat Face

ISO 228-1

Group 0300 BSPP Female Swivel Flat Face dimensional drawing

Dimensions & variants

Dimensions in mm

Item number	Hose ID	DN	Threads	A	B	C	H	Hex	Weight (kg)
03000404316	1/4"	8	G 1/4"	51	15	22	Ø4.5	19	0.024
03000406316	1/4"	8	G 3/8"	55	19	26	Ø4.5	22	0.046
03000604316	3/8"	10	G 1/4"	54	16	23	Ø7/4.5	19	0.033
03000606316	3/8"	10	G 3/8"	58	19	26	Ø7	22	0.048
03000608316	3/8"	10	G 1/2"	60	20	27	Ø7	27	0.076
03000806316	1/2"	15	G 3/8"	59	20	26	Ø10/7	22	0.060
03000808316	1/2"	15	G 1/2"	61	20	27	Ø10	27	0.080
03000812316	1/2"	15	G 3/4"	65	20	30	Ø10	32	0.109
03001208316	3/4"	20	G 1/2"	70	23	30	Ø15/10	27	0.139
03001212316	3/4"	20	G 3/4"	73	22	32	Ø15	32	0.126
03001216316	3/4"	20	G 1"	73	22	32	Ø15	41	0.199
03001616316	1"	25	G 1"	83	22	32	Ø20	41	0.223

Article number structure

0300 | 04 | 04 | 316

Series | Hose size code | BSPP size code | Material

Download Datasheet

Product specifications

End 1 — Hose connection	End 2 — Threaded connection	General product information
Type Standard Hose Insert Hose size 1/4"–1" (see variants) Compatible sleeve series 4101, 4102, 4202, 4204, 4300, 4400, 4607, 4608 Hose types & compatibility 4101 — 1-wire braided — non-skive 4102 — 2-wire braided — non-skive 4202 — 2-wire braided — skive 4204 — 4-wire reinforced — skive 4300 — 1- and 2-wire braided — non-skive 4400 — PTFE (Teflon) 4607 — Thermoplastic — SAE 100 R7 4608 — Thermoplastic — SAE 100 R8 Series 0300 hose inserts can be used with the sleeve series listed in the table. Select the sleeve series and size to suit the actual hose type and dimensions. Compatibility applies only to sizes available in both product series and remains subject to validated assembly and crimping specifications.	Type BSPP Female Swivel Configuration Straight · Flat Face Sealing Flat sealing Thread standard ISO 228-1	Material: AISI 316L / EN 1.4404 / UNS S31603 HS code 73079900 Country of origin Norway

Technical info

Hose end

Intended for use with standard hydraulic hoses with 1–4 reinforcement layers, as well as PTFE and thermoplastic hoses, subject to verified hose, insert and ferrule compatibility. Use validated hose preparation and crimping data. Assembly working pressure must not exceed the lowest component pressure rating, adjusted for temperature and service conditions.

BSPP Female Swivel end

Flat-sealing connection with parallel G thread to ISO 228-1.

IM-0300 · HTML DRAFT 01
Layout example based on the group 0300 datasheet.
Information may contain errors or omissions and is subject to change without notice. Verify current specifications and suitability for the intended application before use. Contact Intermec if any information is unclear or inconsistent.