MATERIALAluminium 6082-T6Aluminium
ALUMINIUMAA 6082 / UNS A96082
MATERIAL DATASHEET
Aluminium 6082-T6 (EN AW-6082 / UNS A96082)
Medium-to-high strength structural Al–Si–Mg–Mn alloy with good corrosion resistance and weldability.
Temper shown: T6 (extruded profiles, bars, tubes); properties vary with thickness/section per EN 755-2.
Standards & designations
| Designation | Reference |
|---|---|
| AA/UNS | AA 6082 / UNS A96082 |
| EN | EN AW-6082 (EN 573-3 chemistry; EN 755-2 mechanical – extrusions) |
| ISO | AlSi1MgMn |
Mechanical & physical properties
| Property | Value / condition |
|---|---|
| Temper / Product | T6 (extrusions) |
| Tensile strength Rm | ≥ 290–310 MPa (size-dependent, EN 755-2) |
| Yield strength Rp0.2 | ≥ 250–260 MPa (size-dependent, EN 755-2) |
| Elongation A50 | ≥ 6–8 % (size-dependent) |
| Hardness HB | ~ 95 |
| Density | ≈ 2.70 g/cm³ |
| Young’s modulus E | ≈ 70 GPa |
| Thermal conductivity | ~ 180 W/m·K |
Chemical composition
Weight %
| Element | Mn | Fe | Mg | Si | Cu | Zn | Ti | Cr | Others (each) | Others (total) | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 0.40 | — | 0.60 | 0.70 | — | — | — | — | — | — | bal. |
| Max | 1.00 | 0.50 | 1.20 | 1.30 | 0.10 | 0.20 | 0.10 | 0.25 | 0.05 | 0.15 | bal. |
The information in this datasheet is provided for guidance only. Intermec AS does not guarantee the accuracy or completeness of the data. Users must verify suitability for their specific applications.