MATERIALAluminium 5052Aluminium
ALUMINIUMAA 5052 / UNS A95052
MATERIAL DATASHEET
Aluminium 5052 (EN AW-5052 / UNS A95052)
Non-heat-treatable Al–Mg alloy with good corrosion resistance (marine), weldability and medium strength.
Typical temper shown here: H32.
Standards & designations
| Designation | Reference |
|---|---|
| AA/UNS | AA 5052 / UNS A95052 |
| EN | EN AW-5052 (EN 573-3 chemistry; EN 485-2 mechanical) |
| ASTM | B209/B209M (sheet & plate) |
| ISO | AlMg2.5 |
Mechanical & physical properties
| Property | Value / condition |
|---|---|
| Temper / Product | H32 (sheet/plate) |
| Tensile strength Rm | 215–265 MPa |
| Yield strength Rp0.2 | ≥ 160 MPa |
| Elongation A50 | 7–11 % (thickness dependent) |
| Hardness HB | ~ 60–75 |
| Density | ≈ 2.68–2.70 g/cm³ |
| Young’s modulus E | ≈ 70 GPa |
| Thermal conductivity | ~ 138 W/m·K |
Chemical composition
Weight %
| Element | Si | Fe | Cu | Mn | Mg | Cr | Zn | Others (each) | Others (total) | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| Min | — | — | — | — | 2.2 | 0.15 | — | — | — | bal. |
| Max | 0.25 | 0.40 | 0.10 | 0.10 | 2.8 | 0.35 | 0.10 | 0.05 | 0.15 | bal. |
The information in this datasheet is provided for guidance only. Intermec AS does not guarantee the accuracy or completeness of the data. Users must verify suitability for their specific applications.